Induction Pipe Bends & Coils

Applied Alloys International is Australasia’s Premier Stockist of Induction Pipe Bends for Power Generation, Mining, Oil & Gas.

We also Cut Groove, Fabricate Special Sizes and Galvanise to suit our customers requirements – Any radius from 3D to 10D and any angle up to 180 Degrees.

We can assist with assist with design through to manufacture of tubular boiler components.

Sizes: 1″ – 42″ ( DN25 – DN900 )

We can manufacture compound induction pipe bends such as serpentine style heat exchangers or other unusual shapes.

Our Induction Bends

Long Radius Induction Bends

Compound Induction Pipe Bend “Spool Pieces” can substantially reduce the number of welds required during fabrication. Fewer weld joints mean lower manufacturing costs as well as better pipeline integrity. Induction Pipe Bends are available in almost any commercially available material – Carbon Steel A53, A106 etc., Chrome Moly P5, P11, P22, P91, Stainless Steel, Duplex, ULTRA 600 Abrasion Resistant, Nickel Chrome & TITANIUM etc. Angle: 6°, 11.25°, 22.5°, 30°, 45°, 60°, 70°, 80°, 90°

Available to JIS & DIN.

Helical & Serpentine Bends

Mandrel, Push or Roll Bending are all cold bending methods which can be used to manufacture Helical, Serpentine or Compound Bends. Endless design possibilities shapes can be manufactured – Helical Steam Coils shown in the photo above.

Standard Pipe Bends Dimensions (3D & 5D)

The following charts show dimensions for our standard range of 3D and 5D Bends. We also manufacture custom bends to suit our customer’s requirements
BEND_H

3D BENDS

90 DEG BEND DIMENSIONS SHOWN

CUSTOM MADE BENDS – 11.25Deg thru 180.00Deg AVAILABLE

Nominal
Size		 Wall Thickness (mm) Bend Radius Centre to Face
X and Y
STD WT XS
50 3.91 5.54 150 As required
60 5.16 7.01 195 As required
80 5.49 7.62 240 As required
90 5.74 8.08 270 As required
100 6.02 8.56 300 As required
125 6.55 9.53 375 As required
150 7.11 10.97 450 As required
200 8.18 12.70 600 As required
250 9.27 12.70 750 As required
300 9.53 12.70 900 As required
350 9.53 12.70 1050 As required
400 9.53 12.70 1200 As required
450 9.53 12.70 1350 As required
500 9.53 12.70 1500 As required
600 9.53 12.70 1800 As required
304 304H Stainless Steel

304/304H are austenitic chromium-nickel alloys known to be among the most adaptable and widely applied stainless steels in the 300 series. 304H has a higher carbon content and is often dual-certified as 304. UNS S30400, S30409

  • Seamless & Welded Pipe ½” – 24″ | 15Nb – 600NB | Schedule 10s, 40s, 80s, 1/120, 160s, XXH
  • Butt Weld Fittings to suit in ASTM / ASME 403
  • High Pressure Fittings ½” – 2″ and 3-4″ special builds, Class 3000 THRD/SW in ASTM / ASME 182
  • Flanges Class 150, 300, 600 in ASTM / ASME 182 UNS S 30400 / S30409 JIS G3459 SUS304 TP
Grade 310 310H

310S/310H are austenitic stainless steels often used in high-temperature sulfur-bearing gas atmospheres, heat exchanger and recuperator tubing, and molten salt applications. 310S has a lower carbon content for easy fabrication and 310H has a higher carbon content for increased creep resistance. UNS S31008, S31009

  • Seamless & Welded Pipe ½” – 24″ | 15Nb – 600NB | Schedule 10s, 40s, 80s, 1/120, 160s, XXH
  • Butt Weld Fittings to suit in ASTM / ASME 403
  • High Pressure Fittings ½” – 2″ and 3-4″ special builds, Class 3000 THRD/SW in ASTM / ASME 182
  • Flanges Class 150, 300 in ASTM / ASME 182 UNS S3108 / S3109
ASTM Grade 316 316H

316/316H are molybdenum-bearing steels with higher resistance to corrosion. Increased corrosion resistance than 304/304H. 316H with a higher carbon content has greater tensile and yield strength. UNS S31600, S31609

  • Seamless & Welded Pipe ½” – 24″ | 15Nb – 600NB | Schedule 10s, 40s, 80s, 1/120, 160s, XXH
  • Butt Weld Fittings to suit in ASTM / ASME 403
  • High Pressure Fittings ½” – 2″ and 3-4″ special builds, Class 3000 THRD/SW in ASTM / ASME 182
  • Flanges Class 150, 300, 600 in ASTM / ASME 182 UNS S31600 / S31609 JIS SUS316 X5CrNiMo17-12-2
ASTM Grade 317L

317/317L are molybdenum-bearing steels that offer a higher stress-to-rupture, creep, and tensile strength at elevated temperatures. 317L has a lower carbon grade which provides resistance to sensitisation during welding. UNS S31700, S31703

  • Seamless & Welded Pipe ½” – 24″ | 15Nb – 600NB | Schedule 10s, 40s, 80s, 1/120, 160s, XXH
  • Butt Weld Fittings to suit in ASTM / ASME 403
  • High Pressure Fittings ½” – 2″ and 3-4″ special builds, Class 3000 THRD/SW in ASTM / ASME 182
  • Flanges Class 150, 300, 600 in ASTM / ASME 182 UNS 31703
ASTM Grade 321 321H

321/321H are titanium-bearing steels not sensitive to intergranular corrosion after heating within the range of carbide precipitation 427–816°C. 321H has a higher carbon content for enhanced creep resistance and higher strength. UNS S32100, S32109

  • Seamless & Welded Pipe ½” – 24″ | 15Nb – 600NB | Schedule 10s, 40s, 80s, 1/120, 160s, XXH
  • Butt Weld Fittings to suit in ASTM / ASME 403
  • Flanges Class 150, 300, 600 in ASTM / ASME 182 UNS S32100 / S32109
ASTM Grade 347 347H

347/347H are austenitic chromium steels containing columbium. Often used in refineries, high-temperature chemical processing, and high-temperature steam service. 347H has a higher carbon content for enhanced creep resistance and higher strength. UNS S34700, S34709

  • Seamless & Welded Pipe ½” – 24″ | 15Nb – 600NB | Schedule 10s, 40s, 80s, 1/120, 160s, XXH
  • Butt Weld Fittings to suit in ASTM / ASME 403
  • Flanges Class 150, 300, 600 in ASTM / ASME 182 UNS 34700 / S34709

5D BENDS

90 DEG BEND DIMENSIONS SHOWN

CUSTOM MADE BENDS – 11.25Deg thru 180.00Deg AVAILABLE

Nominal
Size		 Wall Thickness (mm) Bend Radius Centre to Face
X and Y
STD WT XS
50 3.91 5.54 250 As required
60 5.16 7.01 325 As required
80 5.49 7.62 400 As required
90 5.74 8.08 450 As required
100 6.02 8.56 500 As required
125 6.55 9.53 625 As required
150 7.11 10.97 750 As required
200 8.18 12.70 1000 As required
250 9.27 12.70 1250 As required
300 9.53 12.70 1500 As required
350 9.53 12.70 1750 As required
400 9.53 12.70 2000 As required
450 9.53 12.70 2250 As required
500 9.53 12.70 2500 As required
600 9.53 12.70 3000 As required

Do You Have a Question Regarding Our Services?

Contact Us